Attach a spade connector to the red wire from the door harness to the 3rd tab on the cherry switch.ģ). Once you do that, splice the green wire from the door to the purple wire on the cabinet side optic harness.Ģ). The green and black wires on the door optic harness needs to be lengthened to come back toward the hinges, under the reel tray over to the 3-way cherry switch that’s located on top of the Bill Validator.ġ).
In a Casino environment it is desirable to have the optics, working for home use it really makes no difference so you can bypass the optics and never have to worry about them again.įor this project you will need a couple of spade connectors of suitable size to fit onto the Cherry switch that is located up near the bill validator, some wire for splicing, a spade connector crimp tool and a wire cutter/stripper. When this happens the door optics can become misaligned. If there is one problem with the IGT S2000, it would have to be that if not sitting level the cabinet can and will somewhat distort itself.
